Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Motor & Opener Cost in Yorba Linda?
Replacing a gate opener or motor in Yorba Linda typically costs $650 to $1,900 installed for a residential driveway swing or slide gate, and $1,200 to $3,400 for a light-commercial or HOA operator. Repairing an existing motor, control board, or sensor usually runs $150 to $550. The numbers that matter most are the gate type (swing or slide), gate weight, and whether the operator is a residential brand like Mighty Mule or Ghost Controls or a commercial-grade unit like FAAC, BFT, or DoorKing.
Those ranges are estimates, not quotes. Every gate is different, and the written estimate after we look at your system sets the final price. If your gate is stuck, slow, or making a noise it didn’t used to make, the fastest way to know what you’re facing is a call. Reach us at (855) 382-4716. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Residential gate opener replacement: $650 to $1,900 installed.
- Commercial or HOA operator replacement: $1,200 to $3,400 installed.
- Control board, sensor, or motor repair: $150 to $550.
- Gate weight, type, brand, and access control are the four biggest cost drivers.
- Estimates are free, and the written estimate sets the final price.
Gate Motor & Opener Cost Breakdown (2026)
The table below shows typical installed ranges for Yorba Linda properties in 2026. These are estimates for planning purposes. Your final price depends on what we find on-site.
| Service | Typical Cost Range | Notes |
|---|---|---|
| Residential swing gate operator (single leaf) | $700 – $1,600 | Mighty Mule, Ghost Controls, Linear, Elite |
| Residential slide gate operator (single leaf) | $900 – $1,900 | Requires track and roller inspection before install |
| Dual-leaf swing gate | $1,400 – $2,400 | Two operators, often with a safety loop or photo eye |
| Light-commercial / HOA operator | $1,200 – $3,400 | FAAC, BFT, DoorKing, LiftMaster commercial |
| Motor or gear replacement | $250 – $550 | Depends on brand and part availability |
| Control board replacement | $200 – $500 | Brand-specific; we carry parts for common brands |
| Safety sensor or photo eye | $150 – $350 | Often required for a working system; ask us |
| Loop detector repair | $200 – $450 | Common on commercial driveways and gated communities |
| Remote or keypad programming | $75 – $200 | Per unit; brand-dependent |
| Full operator swap on existing gate | $1,000 – $2,800 | Keeping the gate, replacing the opener and wiring |
What pushes a job toward the top of these ranges? Gate weight is the first thing we check. A 12-foot ornamental steel leaf twists and loads an operator very differently than a lighter aluminum frame of the same size. Swing versus slide matters too: a slide gate needs a track, rollers, and guide posts that are true and level, and any of those being worn adds labor before the operator even goes on. Brand availability comes into play as well. Parts for the brands we work on (LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule) are generally straight forward to source, but every manufacturer’s pricing shifts a little year to year. Finally, the access control: a basic remote setup is one thing, an intercom or phone-app entry system with an extra loop detector is another.
What Affects Gate Motor & Opener Pricing in Yorba Linda
Yorba Linda has a wide mix of gate styles. Older single-family homes in neighborhoods like Travis Ranch and Fairgreen tend to have lighter swing gates, while horse properties and larger lots out toward the hills often carry longer, heavier slide gates that need more torque. The size of the gate is usually the first thing that moves a number, not the operator on its own.
- Gate type and weight. A swing gate and a slide gate take different operators at different price points. Heavier panels need a stronger motor, which costs more and sometimes means upgrading the power or control wiring. A slide gate also brings its own track, rollers, and guide posts into the estimate.
- Brand of the operator. Entry-level residential units from Mighty Mule and Ghost Controls sit at one end. Commercial-grade operators from FAAC, BFT, and DoorKing sit at the other. Being clear about which brand you already have tells us immediately what parts and knowledge we’re dealing with, because we work on your brand rather than guessing.
- New install versus repair. If the motor is failing but the gate, wiring, and control box are sound, a repair or a straight operator swap keeps the cost down. A full new install adds labor for mounting, wiring, and dialing in the safety devices.
- Access control and safety equipment. Photo eyes, safety loops, keypads, intercoms, and remote sets each add to the job. Some of it is required for a safe, working system; some of it is preference. We’ll separate the two for you.
- Power and wiring. If the gate is far from the panel, or the existing wiring has aged, running new line adds time and material. As a dedicated gate specialist we come equipped for this, but it does affect the estimate.
- Gate condition. Broken hinges, a misaligned track, or a sagging post can force an operator to work against its own gate. We check these before quoting a motor, because a new opener on a bad frame just fails again.
How to Save on Gate Motor & Opener
There isn’t a secret discount to chase. The savings come from doing the diagnosis correctly the first time and from fixing what actually failed rather than replacing more than you need.
- Get the diagnosis right before you buy a motor. A gate that “won’t open” is sometimes a bad board, a tripped sensor, or a dead remote, not a dead motor. We work on your brand and diagnose by brand-specific logic rather than swapping parts until something works.
- Repair before you replace when the gate is healthy. If the panel, hinges, and track are in good shape, an operator repair or swap is almost always cheaper than a full new system. Ask the direct question: repair or replace? We’ll tell you which makes sense and why.
- Bundle the small stuff. If a remote, keypad, or sensor needs attention while we’re already on-site for the motor, folding it into the same visit saves you a second trip.
- Keep the gate you have if it’s sound. Replacing the operator on a good gate keeps the whole job smaller than installing a new gate and a new motor together.
- Ask for the estimate in writing. That’s the number that sets the final price. Estimates are free, so there’s no cost to finding out exactly where you stand.
To get that estimate, call (855) 382-4716. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re weighing a fix against a full replacement, our gate repair Yorba Linda page walks through how a repair visit usually goes.
Is It Cheaper to Repair or Replace a Gate Motor?
Repairing a gate motor usually costs $150 to $550, while replacing the whole operator runs $650 to $1,900 installed for residential. So repair is nearly always cheaper when the motor, board, or sensor is the only failing part and the gate itself is structurally sound. Replacement makes more sense when the operator is at the end of its life, parts are getting hard to find, or the gate is heavy enough that an undersized motor keeps failing. If the gate, track, and wiring are healthy, we lean toward repair first.
What Does a New Gate Opener Cost for a Commercial or HOA Gate?
A light-commercial or HOA gate operator in Yorba Linda typically costs $1,200 to $3,400 installed, depending on the brand and access control. Commercial-grade units from FAAC, BFT, and DoorKing, along with LiftMaster commercial operators, sit in this range because they’re built for heavier, more frequent use. Loop detectors, intercoms, and multi-remote setups add to the total. For multi-unit properties and gated entries, we size the operator to the gate and the traffic it actually sees. Call (855) 382-4716 for an exact quote.
Can You Come Today If My Gate Won’t Open?
Yes, same-day service is often available, and a stuck gate is one of the calls we handle most. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday. When we arrive, we identify your brand first, because knowing whether we’re looking at a Linear, Elite, Viking, or Ghost Controls unit tells us where to look and what parts to bring. Electric gate repair is one of our core services, so operator boards, sensors, loops, and motor failures are native to us, not a side job.
Which Gate Brands Do You Work On?
We work on nine gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the entry-level residential units many Yorba Linda homeowners have to the commercial-grade operators found on HOA and multi-unit properties. Brand-specific knowledge means we carry parts and knowledge for your brand, and we diagnose by that brand’s logic rather than guessing at general failure patterns. It also means we’re a single vendor across the full life of a gate: diagnosis, repair, and new installation, whether the system is manual or electric.
FAQs – Gate Motor & Opener Cost
How much does a gate opener cost installed in Yorba Linda?
A residential gate opener installed in Yorba Linda typically costs $650 to $1,900, and a light-commercial or HOA operator runs $1,200 to $3,400. The final figure depends on gate type, weight, brand, and access control. That range is an estimate; a free on-site estimate sets the exact price. Call (855) 382-4716 to schedule one.
How much does it cost to fix a gate motor that won’t open?
Most gate motor repairs in Yorba Linda fall between $150 and $550, depending on whether it’s a board, sensor, gear, or the motor itself. A dead remote or tripped sensor is often at the lower end. A full motor or gear replacement sits higher. Call (855) 382-4716 and we’ll narrow it down before we come out.
Is it cheaper to repair or replace a gate opener?
Repair is usually cheaper, at roughly $150 to $550, versus $650 to $1,900 to replace a residential operator. Replacement makes more sense when the gate is heavy and the motor keeps failing, or when parts are scarce. We’ll tell you which way to go for your specific gate. Call (855) 382-4716 for a free estimate.
Do you charge for a gate opener estimate?
No. Estimates are free, and the price we quote in writing sets the final price. We look at the gate, the operator, and the access control, then put the numbers in front of you. Call (855) 382-4716 to set one up. We answer 24/7.
Can you repair an electric gate today?
Often, yes. Same-day service is available in many cases, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Electric gate repair is one of our core services. Call (855) 382-4716 with your brand and gate type and we’ll get you booked.
Getting an Exact Number for Your Gate
Gate motors and openers are not commodity items. Two gates the same size can need very different operators, and the brand you already have, or the brand you choose, shapes both the cost and how easy the job is to diagnose down the road. As gate-only specialists covered across nine brands, we come to a Yorba Linda gate equipped for the brand in front of us, from residential driveways to multi-unit properties. We’ve served Yorba Linda for 15 years, and we can work with you on the full life of the gate, from a repair today to a new installation tomorrow. If your gate is stuck, slow, or just not responding, don’t sit on it. Call (855) 382-4716 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Yorba Linda market as of 2026. Gate Repair Yorba Linda offers free estimates – call (855) 382-4716.
Written by the team at Gate Repair Yorba Linda, serving Yorba Linda since 2011.
What Our Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Ramon Vargas"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Dale Parker"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Bethany Hoffman